Plate Heat Exchanger - Efficiency and Flexibility

• Easy to Remove and Clean
  You simply remove the tie bolts and slide back the movable frame part.  Now the plate pack can be inspected, pressure cleaned, or removed for refurbishment if required.
• Expandable
  A very significant feature of the plate heat exchanger is that it is expandable.  Increasing your heat transfer requirements means simply adding plates instead of buying a new heat exchanger, saving time and money.
• High Efficiency
  Because of the pressed patterns in the plates and the relative narrow gaps, very high turbulence is achieved at relative low fluid velocity.  This combined with counter directional flow results in very high heat transfer coefficients.
• Compact Size
  As a result of the high efficiency, less heat transfer area is required, resulting in a much smaller heat exchanger than would be needed for the same duty using other types of heat exchangers.  Typically a plate heat exchanger requires between 20-40% of the space required by a tube & shell heat exchanger.
• Close Approach Temperature
  The same features that give the plate heat exchanger its high efficiency also makes it possible to reach close approach temperatures which is particularly important in heat recovery and regeneration applications.  Approach temperatures of 1^oC are possible.
• Multiple Duties in a Single Unit
  The plate heat exchanger can be built in sections, separated with simple divider plates or more complicated divider frames with additional connections.  This makes it possible to heat, regenerate, and cool a fluid in one heat exchanger or heat or cool multiple fluids with the same cooling or heating source.
• Avoid cross contamination
  Each medium is individually gasketed and as the space between the gaskets is vented to the atmosphere, cross contamination of fluids is eliminated.
• Less Fouling
  Very high turbulence is achieved as a result of the pattern of the plates, the many contact points, and the narrow gap between the plates.  This combined with the smooth plate surface reduces fouling considerably compared to other types of heat exchangers.
• Lower Costs
  High heat transfer coefficients mean less heat transfer area and smaller heat exchangers, and sometimes even less heat exchangers.  This and less space requirements, reduced flow rates, and smaller pumps means.

Sondex - Gasketed Plate Heat Exchanger

Sondex gasketed plate heat exchanger merupakan product terpopular yang ada dan dengan berbagai ukuran plate & frame-nya akan memberikan kemudahan dalam penggunaannya.

• Capacity: 0.1 m3/ hr - 3500 m3/hr
• Operating pressure: up to 25 bar
• Operating temperature:  up to 180 deg C
• Plate material: AISI 304 & 316 Stainless steel; Titanium; SMO; Hastelloy 
• Gasket material: HT-NBR; EPDM; FPM
• Connection sizes: 32 - 500 mm

Dengan glue-less gasketed Sondex system & reinforced gasket groove plate akan memudahkan untuk pemeliharaan dan memastikan pemasangan seperti sedia kala.

PT Tridaya Manunggal Karya

PT Tridaya Manunggal Karya adalah sebuah perusahaan swasta nasional yang bergerak di bidang Engineering, Procurement, Supply & Services untuk oil & gas, petrochemical, power generation, marine & general industri.

PT Tridaya Manunggal Karya adalah agent dari Sondex plate heat exchanger & fresh water distiller di Indonesia.